CLEXOKRYST-SEAL
OVERVIEW
CLEXOKRYST-SEAL is crystalline waterproofing slurry for concrete substrates. It is a single component unique reactive chemical treatment for the waterproofing, protection and repair of concrete. CLEXOKRYST-SEAL seal cures a lot faster than the current standard products eliminating the need for days of water curing and protection.
PROPERTIES
- Good resistance against aggressive media with a PH range of 3-12 and against soft water with low ion content.
- Shrinkage compensated, no spider-web cracking.
- Can be applied on damp surface.
- Does not require sealing lapping, and finishing of seams at corners, edges or between membranes.
- Becomes an integral part of the substrate.
- Self-healing properties of up to 0.3-0.4 mm static cracks.
- Non-toxic.
- Potable water approved.
- Good sulphate resistance.
AREAS OF USE
- Waterproofing of basements and below grade parking structures.
- Suitable for horizontal and vertical walls.
- Waterproofing of portable water structure.
- Protection of damp and spill-ways.
- Waterproofing of elevator pits.
- Slab waterproofing (dry shake application).
- Waterproofing of Sewage structures, foundations, tunnels and subway systems.
HEALTH & SAFETY
As with all chemicals, caution should always be exercised. avoid prolonged contact with eyes and skin.
Protective clothing such as gloves and goggles should be worn. See the relevant material safety data sheet for more information.
PACKING & STORAGE
CLEXOKRYST-SEAL is available in 20kg & 25 Kg PP/Paper bags.
Shelf life is 12 months in unpinned container. store containers in a clean dry area protected from direct Sunlight and extreme heat and cold.